Product Description
Water Cooled Pump Inverter
This version of the Mac3 HydroControllers (programmable variable speed inverters) is water cooled. It is in-line mounted in any position along the pump pipe work via the in built 1.25" female BSP mountings. This unit contains a built-in pressure sensor and flow meter. It varies the pump speed to match demand.
All HydroControllers come with built-in pump protection including dry-run, under/over voltage, short circuit, low system pressure, output over voltage, sensor failure, over temperature and water hammer)
These HydroControllers are Single Phase to control a Single Phase pump up to 1.5hp or 2.2hp (other options are available on a longer lead time, please talk to to the Technical Team for advice).
Easy to install and the operating parameters, including restart pressure, are easily programmed using the LED display interface.
It is a unit with ADVANCED features which means that it is able to communicate with up to eight other pumps (via their HydroControllers). This "multimaster" mode allows the HydroController units to self-appoint the role of "Master". Should the current Master unit develop a fault, the master role will be taken by another unit and the system can continue to function as intended. This greatly improves fault tolerance and reduces maintenance costs.
The ADVANCED unit also features two extra output relays and two auxiliary digital (switch) inputs which can be configured as needed. It is also designed to be compatible with the Mac3 Multipress allowing the system to function with a commercial irrigation controller.
Technical Information
- Single Phase for Single Phase Pump
- Phase current: 12A
- Max Pump Power: 1.5hp or 2.2hp
- Max Dimensions: 190mm wide x 170mm deep x 360mm high
- Mounting: Any Position, Inline 1.25" BSP Female
- Cooling: Water
- Ambient Temperature: 5oC to +40oC
- Display: 2 16 LCD
- Ingress Protection: IP65
- Programmable Pressure Range: 0.3 - 7.5 Bar (+- 0.2Bar)
- Max Overpressure 12 Bar
- Electrical Safety: EN60730
- Pump Protections: Dry run, Over/Under-voltage, Short Circuit, Over-current, Over Temperature, Pressure Failure, Sensor Failure, Water Hammer
Documents
- HydroController Brochure (pdf).
- HydroController Manual (pdf).
Other Versions
STANDARD verions of this water cooled pump (controls a single pump and optionally an additional fixed speed pump) inverter along with three phase controllers for three phase pumps and single to three phase models are available.
The HydroController is also available in an Air Cooled model and also as a HydroController Solar for off-grid installations, and HydroController Pool for Swimming pool applications.
Please contact us for details and lead times.
Useful Information
How to improve water pump efficiency (and save money) - 5 top tips blog post.
