Product Description
230L Flat Backed Water Butt in a Wooden Board Effect
The Norway Water Butt has a deeply grained and ultra-matt finish. It is modelled on real nordic spruce wooden shingles, however it is infact made of UV protected and weather resistant Polyethylene so it won't fade or crack in the weather.
This space-saving rectangular water butt is great for even the smallest gardens. It has a straight flat back, so will stand right up against walls, fences or sheds.
The sloping lid is built into the waterbutt design, it is a completely sealed tank and therefore is completely child (and cat) safe, as the lid doesn't come off. This also means that the the internals cannot be accessed for cleaning so it is essential that you have a good filter before your waterbutt to take out any leaves and debris that may form a sludge at the bottom of the water butt. We recommend the Filter Collector from 3P Technik for this. It filters the downpipe water, diverts it to your water butt and also acts as an overflow back down your downpipe when your water butt is full.
This water butt comes with a 3/4" brass threaded connection point at the front for the supplied Brass Tap, and a side outlets for draining down, or connecting the water butt to another rain storage tank on either side (near the base).
Also included is a Kit to drill a hole near the top of the water butt in order to connect a downpipe rainwater diverter or filter. We recommend using the 3P Technik Filter Collector.
Free Delivery Mainland UK.
Optional Extras
Rainwater Diverter
We recommend installing the 3P Filter Collector with this tall Water Butt. The Filter Collector connects your Water Butt directly to your Downpipe and also filters the water, removing any debris, before transferring the water into the tank. The Filter Collector is ideal for roof areas up to 90m2 (other filters are available for larger roof areas).
Long Link Push Fit Kits can also be purchased if you want install the water butt further away from the downpipe. Available in lengths of 1m, 2m or 5m they connect the Filter Collector to your water butt.
Tank to Tank Connection Kit
A Water Butt Linking Kit can be purchased to join two Water Tanks together using the lower 3/4" brass threaded ports.
How to link water tanks together
If you already have a wall tank (or other water butt with a 3/4 inch BSP female threaded connection point near the base of the tank) you can purchase a 3/4" Tank to Tank Connection Kit.
Technical Information
- Capacity: 230 litres (60 gallons) water tank
- Dimensions: W:60cm, D:40cm, H:130cm
- Three 3/4” inset brass threaded connection points (1 tap point for a watering can, 2 x interconnection or drain down points at the base)
- Material: High-quality UV protected polyethylene
- Recommended rainwater diverter: 3P Filter Collector
Documents
Included Components
Each Norway tank is supplied with:
- Quality 3/4" Metal tap in brushed brass finish,
- Accessory Kit, including Holesaw Set and Rubber Grommets
- Wall fixing bracket and screws.
Delivery
The Water Butt comes with free delivery to UK Mainland addresses (prices to other places is worked out based on your postcode before checkout).
The water tank will arrive on a pallet. Our courier company will call you to arrange a delivery date and time convenient to you. They will unload the pallet from the vehicle for you and, where access is possible, move the pallet to a convenient place for you to unload the tank from the pallet.
